• To enhance the Vision, Strategy and plan and to Direct the Shark Quality NPD Team for Robotic Vacuum cleaners to ensure the customer voice is converted into product primary function clearly.

执行和提升开发质量部门的远景/ 战略并管理扫地机器人产品前期设计品质保证小组， 与美国设计部门沟通，审查客户声音是否正确转化为产品设计规格书特性。

• Deploy the organization’s Quality Strategies and objectives within the NPD QA organization. Develop NPD team and conduct periodic performance reviews of the NPD Quality Team members, ensuring appropriate, frank and objective feedback to each Quality team member.

展开质量部门总目标，培养团队并行定期进行绩效沟通。

• To review the design and prototype from DFM & VAVE &design for automation point view.

• 依手板进行设计评审，可制造性、价值工程及自动化装配为评审基本原则。

• To review the design, ensure the NUDD is fully validated from tolerance stack and FEA or testing.

• 评审产品设计，识别出新特异难处并确保NUDD有充分给予设计验证，通常通过公差分析及有限元分析和实验测 试之方法。

• To review the DFMEA with US team and OEM supplier and ensure the main risk items are tracked.

• 和美国团队及代工厂团队主导评审DFMEA并跟踪高风险项目；

• To raise the risks during the NPD process. 提出在前期开发中的主要风险点；

• To review the product spec is breakdown to drawing or test CTQs ；

• 评审产品规格重点指标是否正确充分全面转化为图纸重点 尺寸或重点测试项目；

• Delivers the key NPD Quality Work Packages to Robust design and Safe Launch.

• 按时按质交付NPD质量主要工作任务以确保设计强健并安全投入大指生产；

• Provide regular NPD QA dashboard report on a weekly basis提供质量周报

• Drive Continuous Design Optimization Improvement for existing products.

• 协助跟踪初期设计优化活动；

• To define the on line performance items.

• 定义产线性能测试项目;

• To coordinate the component Score Card & FAI review during NPI stage;

• 主导部件尺寸报告评审；

• To review the VSRs and ensure to use the correct RCA/5whys approach.

• 评审项目问题点清单，确保问题分析至少使用RCA及5WHY方式；

• Support the Process Control Plans & PFMEA/DQTP quality activities and reviewed on an ongoing basis

• 支持制程FMEA/质量控制计划评审，确保关键点有覆盖；

• Support 2/3 tier supplier quality development plan;

• 支持2级3级重点供应商质量提升活动；

• Organize the project and product lesson learnt, add ensure the lessons are converted to standardization design check list, management lessons are taken the process improvement plan.

项目结束后主导经验教训总结，设计教训链接到标准化设计检查清单中，管理教训进行流程改进；

Position Requirements/ Experience:

• 15 years+ working experience in a manufacturing environment. 15年以上制造型企业工作经验；

• At least 5 years mechanical design experience is a must, with experience for Robotics or relative products.

• 必须至少5年以上机构设计经验，有智能类产品经验；

• Basic knowledge on hardware/software is considered as a plus.

• 具有硬件和软件设计方面的基本知识者优先

• Extensive Top Management experience in Design & New product introduction, has quality management experience is preferred; 有设计及产品导入管理经验，有质量管理经验理更佳。

• Fluent spoken English skill is a must;英文口语流利

• Certified ISO 9001 Lead Auditor， TS16949 internal auditor certification is preferred.具有ISO9001内审经

• Strong tolerance analysis capability, strong knowledge in molding processes. Tooling, molding problem solving skills is preferred. 有较强公差分析经验，注塑模具设计经验，有成型问题解决经验更佳

• Strong leadership. Good internal communication skill. 较强的领导力及国际合作沟通技巧。

• Demonstrated high level of confidence and self-motivation 较强的自信力及自律能力

• Strong sense of responsibility and high level deliverability 高度责任感并以结果为导向

• Practical experience in metrology, test, inspection and analysis techniques 有测量、检验分析之实战经验

• Have basic knowledge of quality tools to drive supplier quality professionally 有基本品质工具知识

• Proactive and Optimism 主动乐观

• Action/result oriented: Achieves high level, sustainable performance and results, drive positive change;

结果为导向,积极推动改变

• Hing risk insight capability and demonstrated decision making capability: uses logic and insight to solve difficult problems and create effective solutions，具有风险洞察力，具有通过逻辑分析解决复杂问题的能力

Can support global traveling for short time 能适应短期的出差

上班地址：深圳市龙华区和平东路幸福城商业大厦